CADDXFPV Gazer FPV Analog Camera 1500TVL WDR F1.0 2.8mm 4:3 PAL Micro Camera Review (2026)

Who this camera is for

The Gazer fits analog pilots who fly in low light, whether that is late afternoon freestyle sessions, wooded trails, or indoor spaces with limited lighting, since its F1.0 aperture lets in more light than the F2.0 or F2.5 apertures common on many analog FPV cameras. Cinematic and long range flyers benefit from the 2.8mm lens, which narrows the field of view compared with the wider racing style lenses around 2.1mm, cutting down on the fisheye distortion at the edges of the image while still covering a usable field. Pilots who mainly race on tight, technical tracks where a wide field of view helps spot gates and obstacles at the edge of vision may prefer a wider lens camera, since the Gazer trades some peripheral coverage for a cleaner, more zoomed in center image.

Sensor, lens, and output format

The Gazer uses a 1/1.8 inch image sensor, which is larger than the more common 1/2.7 or 1/3 inch sensors on budget analog cameras, and that extra sensor area is part of what helps its low light performance alongside the wide F1.0 aperture. Horizontal resolution is rated at 1500TVL, near the top end for analog FPV cameras, paired with wide dynamic range processing to hold detail in both bright sky and shaded ground in the same frame. The listed output format is PAL at a 4:3 aspect ratio, so pilots running NTSC-only analog goggles or video receivers will need to switch their display settings to PAL to avoid a scrambled or rolling image, since this camera does not list a switchable PAL and NTSC option like some competing models.

Living with it on a build

The camera has a removable IR-cut filter, letting pilots swap between color daytime flying and a more light sensitive night mode by physically removing the filter rather than switching it electronically through the flight controller. Physical dimensions are compact at roughly 20 by 20mm for the camera body, which fits standard 19 to 20mm analog camera mounts used across most freestyle and cinematic frames without needing an adapter. Power draw is modest, and the camera accepts a wide input voltage range typical of analog FPV cameras, so it runs directly off the flight controller's camera voltage rail on most builds without extra regulation. Because it is a fully analog camera, footage quality depends heavily on the video transmitter and goggles paired with it, so pairing it with a clean, well shielded VTX gets the most out of the sensor.

Trade-offs and how it compares

Against the Foxeer Razer Mini, which is switchable between PAL and NTSC and uses a slightly wider 2.1mm lens for a bigger field of view, the Gazer's PAL-only output and narrower 2.8mm lens make it a better fit for pilots who already standardize on PAL gear and want a more zoomed, cinematic look rather than the widest possible view for racing. Compared with the Caddx Ratel 2, which offers both 16:9 and 4:3 aspect ratios and NTSC and PAL switching in one camera, the Gazer is more specialized toward low light color performance at the cost of that flexibility. Pilots who fly across multiple regions or share footage with NTSC-based friends should weigh that format limitation carefully before choosing this camera over a switchable alternative.

Verdict and who should pick something else

The Gazer is a strong pick for analog pilots prioritizing image quality in dim conditions and a narrower, cleaner field of view, especially those already committed to PAL format goggles and video receivers. Pilots who need NTSC output, or who want to switch between formats depending on the field they are flying at, should choose a switchable camera instead, since converting this one requires changing every other PAL component in the video chain. Racers who value the widest possible field of view for tight gate spotting over aperture speed may also be better served by a wider angle lens option in a similar analog camera line.

Frequently asked questions