VERBANA 4pcs/Set FPV Drone 5 Inch Propeller Guard for 22 Series Brushless Motor Anti-collision Review (2026)

What it is and who it's for

This VERBANA set includes four propeller guards designed to bolt onto the motor mounts of a 5 inch quad built around 22 series brushless motors, a category that includes common sizes like 2207, 2208 and 2212. It targets pilots who fly in tighter spaces with more obstacles nearby, such as wooded trails, indoor spaces, or cluttered backyards, where a stray branch or wall strike is more likely than in open field flying. Beginners still learning throttle control and line choice are a natural fit too, since guards reduce the chance that a minor bump turns into a snapped prop or a bent motor bell mid session. Pilots who fly mostly open field racing lines will get less benefit from the added protection.

Design and materials

The guards are sized to match the mounting pattern used on 22 series motors, which is the bolt spacing shared by popular 5 inch racing and freestyle motors including the 2207, 2208 and 2212 families referenced in the listing, alongside frame styles like the QAV180 and QAV210. The set includes four guards, one per motor arm, so a full quad is covered without needing to buy extras or mix parts from different sets. Ring style prop guards like this work by surrounding the spinning prop with a rigid perimeter, absorbing an impact at the guard rather than letting the blade tip take the hit directly, which is the main mechanism behind the reduced prop breakage pilots report with this style of accessory.

Performance in the air

Adding any prop guard changes the way a quad flies, mainly through extra weight at the very tip of each arm and increased aerodynamic drag during fast maneuvers, both of which soften acceleration and can make the quad feel less snappy compared with flying bare props. In exchange, the guard absorbs glancing impacts with branches, walls, or other obstacles that would otherwise reach the propeller directly, which is the trade most pilots are making when they choose to fly with guards installed. This is generally a worthwhile trade for tight indoor or wooded flying where crash frequency is higher, and a less necessary one for open field flying where obstacles are rare and every bit of agility matters more.

Fit and compatibility

Fit depends on matching the guard's mounting pattern to the motor's bolt spacing, and the listing specifically targets 22 series motors such as the 2207, 2208 and 2212 families, so pilots should confirm their own motor's mounting bolt pattern before ordering. It also references compatibility with QAV180 and QAV210 style frames, which gives a useful reference point for arm thickness and prop clearance, though builders on other 5 inch frame designs should check that the guard diameter leaves enough clearance from the frame arms and camera mount. As with most bolt on guards, using the correct screw length for the motor stack is important so the guard sits securely without interfering with motor cooling or prop clearance.

Value and what to watch for

A four guard set covering a full quad in one purchase is a straightforward value proposition for pilots who fly in tighter, more obstacle heavy environments and want to cut down on cracked props and bent motor bells. The clear trade-off, shared by essentially every prop guard on the market, is the weight and drag penalty that comes with the added plastic ring on each arm, which will be noticeable to pilots used to flying bare. Buyers should also budget a little time to confirm bolt pattern and prop clearance against their specific frame before committing, since guards that do not match the motor spacing exactly will not sit flush or protect as intended.

Frequently asked questions