RunCam RC Battery Straps 10pcs FPV 20x220mm Non-Slip Rubberized Tie Down Review (2026)

Who it is for

These straps are aimed at FPV pilots and RC hobbyists who need a reliable, non slip way to secure LiPo batteries to a frame without relying only on hook and loop pads underneath the pack. The 20x220mm size fits the battery trays and frame profiles common on freestyle and mid sized racing quads, and the straps work across RC helicopters, planes, and cars as well, so they suit anyone maintaining a mixed fleet of RC vehicles rather than just multirotors. Buying a 10 piece pack makes sense for pilots who build, crash, or rebuild multiple quads, since spares are already on hand when a strap eventually wears out.

Material and grip

The straps are built from nylon combined with microfiber PU leather, a pairing chosen for durability and resistance to stains and abrasion over time, rather than a simple woven nylon strap alone. A rubberized surface adds grip against the battery pack, which is the key feature that keeps a LiPo from sliding out during hard maneuvers, sudden stops, or rough landings, without needing extra hook and loop fasteners stuck to the frame and battery. This non slip design is meant to work as the primary retention method, though many pilots still pair it with a battery pad for extra insurance.

Fit and sizing

At 20mm wide and 220mm long, these straps suit typical 5 inch freestyle and racing quad battery bays sized for common 4S to 6S packs, giving enough length to wrap around the battery and frame with room to spare for a secure pull. Pilots flying larger batteries, such as bulkier long range packs, or very small micro whoops with tiny frames, should check their battery and frame dimensions against this size before buying, since the fixed 220mm length will not stretch to fit dramatically larger or smaller setups. The metal buckle closure allows for a quick, adjustable, secure fit once installed.

Durability considerations

While the nylon and PU leather construction and rubberized grip hold up well under normal flying and typical rough landings, any strap can still wear out or snap over time with repeated hard crashes, since no soft strap material is fully immune to sharp impacts or being pinched between a frame arm and the ground. Buying a 10 pack rather than a single strap makes this a minor concern in practice, since replacements are already on hand, and rotating in a fresh strap after a hard crash is good practice regardless of brand. Inspecting straps periodically for fraying or a loosening buckle is a sensible habit for any pilot flying aggressively, and keeping a spare in a field bag means a worn strap never grounds a flying session.

Bottom line

For securing batteries on typical freestyle and racing FPV quads, as well as other RC vehicles, these RunCam straps offer a durable nylon and PU leather build with a rubberized non slip grip that holds packs firmly in place. The 20x220mm size covers most common battery and frame combinations, and the 10 piece pack means spares are ready when a strap eventually needs replacing after a hard crash. Pilots with unusually large or very small setups should double check sizing, but for the typical 5 inch build this is a solid, practical choice.

Frequently asked questions