SoloGood Caddx Ratel2 Starlight 1200TVL 2.1mm NTSC/PAL Super WDR FPV Camera Review (2026)

Who this camera is for

This is a reseller listing for the Caddx Ratel2 Starlight, a camera built by Caddx and sold here under the SoloGood storefront rather than directly from Caddx. It suits freestyle and racing pilots who want the genuine Ratel2 sensor and its wide 165 degree field of view without necessarily buying from Caddx's own channels. Pilots who fly into evening or low light conditions stand to benefit most from the Starlight sensor's extended sensitivity, since it is built to keep producing a usable image well past the point where a standard sensor would show mostly noise. Buyers should treat this as a third-party listing and confirm seller details and return policy, since reseller listings can vary in packaging and after-sale support compared to buying straight from Caddx or an authorized retailer.

Sensor and low light performance

The Ratel2 uses a 1/1.8 inch Starlight sensor, which is physically larger than the sensors found in many budget FPV cameras and is tuned specifically for very low light sensitivity, with published sensitivity reaching into extremely low lux figures. In practice, this means the camera can keep delivering a recognizable image well into dusk, indoor spaces with weak lighting, or overcast conditions where a standard micro camera would already be struggling. Super WDR processing helps balance bright and dark areas in the same frame, such as a sunlit sky next to a shaded treeline, so pilots are less likely to lose detail to blown-out highlights or crushed shadows during mixed lighting flights. Very dark scenes can still look grainy, since boosting sensitivity that far inherently adds visible noise to the image.

Lens and field of view

A 2.1mm lens gives the Ratel2 a wide 165 degree field of view, which suits freestyle flying where a pilot needs to see obstacles well off to the sides while maneuvering close to structures, trees, or other props. Racing pilots also benefit from a wide view when navigating tight gates at speed, since a narrower lens can make fast turns feel disorienting. The camera supports both 4:3 and 16:9 aspect ratios and can switch between NTSC and PAL video standards, which makes it adaptable to different video transmission systems and goggle setups rather than locking a pilot into one regional standard.

Build and installation

The Ratel2 is a micro-format FPV camera, small and light enough to mount on typical 5 inch freestyle and racing frames without adding meaningful weight. It ships with a menu board plus 2-pin and 3-pin silicone cables for wiring into a flight controller or video transmitter, along with a small Allen wrench for adjusting the lens angle. The camera accepts a wide power input range, which gives builders flexibility in how they wire it into a typical FPV power system without needing a dedicated regulator just for the camera. Because it is a reseller listing, buyers should double check that the exact package contents match what Caddx includes with the standard Ratel2 before assuming every accessory is present.

Buying through a reseller

Because this listing is sold through SoloGood rather than directly by Caddx, the core camera hardware should match the standard Ratel2 Starlight specification, but pricing, bundled accessories, and customer support may differ from buying through Caddx's own store or an authorized dealer. This is common in the FPV parts market, where resellers package genuine components under their own storefront, and it does not necessarily mean the camera itself is different. Buyers who want the most predictable support experience may prefer an authorized Caddx retailer, while those comfortable with reseller listings can use this as a way to access the same Starlight sensor and lens combination, provided they confirm seller ratings and return terms before ordering.

Frequently asked questions