iFlight TPU Camera Mount Protector Angle Adjustable for GoPro 5 6 7 XL5 DC5 XL10 Quadcopter Review (2026)

What it is and who makes it

This is a 3D printed camera mount from iFlight built from TPU filament, a flexible plastic that is commonly used for FPV mounts because it can flex slightly on impact instead of snapping outright the way rigid ABS or PLA parts can. The mount is designed to hold a GoPro Hero 5, 6, or 7 action camera and is sold specifically as an accessory for iFlight's own XL series quadcopter frames, including the XL5, DC5, and XL10 lines. Listings for closely related iFlight TPU mounts in the same family describe an adjustable angle range of roughly 0 to 40 degrees, letting pilots tilt the camera from level to a steep dive angle.

Adjustable angle for different flying styles

The adjustable hinge is the main selling point over a fixed mount, since a single quad can switch between a level angle for cinematic, smooth flying and a steeper downward tilt for gate racing or diving through gaps, all without printing a second mount. Pilots typically loosen a screw at the hinge, rotate the camera cradle to the desired angle, and retighten before flight. Because the adjustment relies on friction and a screw rather than a locking ratchet, it is worth checking the tightness before every flight, since a mount that shifts mid-flight will throw off framing on any footage captured during that pack.

Frame compatibility

This particular mount is built around iFlight's XL5, DC5, and XL10 frame geometry, so the bolt pattern and stack height are matched to those specific builds rather than being a universal fit. iFlight sells closely related versions of this same TPU mount tuned for other frames in its lineup, including the SL5, BumbleBee, Green Hornet, and Chimera7, as well as separate versions for newer GoPro Hero 8, 9, and 10 body shapes. Anyone flying a frame from a different manufacturer, or a newer GoPro model, should double check part numbers before ordering, since a mount built for one frame family will rarely bolt straight onto another without modification.

Materials and included parts

Related iFlight TPU mount listings describe the package as including the printed camera mount itself, a base mount piece, a set of screws, and a small screwdriver, which is enough hardware to get the mount installed without hunting down extra fasteners. TPU is naturally more forgiving than a hard plastic in a crash, since it can absorb some of the shock and flex rather than shattering, though a hard enough impact can still crack or tear a thin printed part. Because it is a 3D printed accessory rather than an injection molded one, minor variation in fit and finish between units is normal and not a sign of a defect. Keeping a spare mount on hand is a reasonable idea for anyone who flies aggressively, since a printed part is simple and cheap to replace compared to a cracked camera.

Who should buy it

This mount makes the most sense for pilots who already own or are building an iFlight XL5, DC5, or XL10 frame and want a GoPro-compatible mount that matches the frame's factory geometry without printing a custom part. The adjustable angle adds real flexibility for switching between cinematic and freestyle flying styles on the same airframe, and the included hardware means it is ready to bolt on as soon as it arrives. It is a poor fit for pilots on non-iFlight frames or newer GoPro bodies, who should look for a mount built for their specific frame and camera combination instead of assuming a generic fit will bolt straight on.

Frequently asked questions