ANBES Soldering Iron Kit Electronics 60W Adjustable Temperature, 5 Tips, Desoldering Pump, Stand, Tweezers Review (2026)

A basic but complete kit from an established name

ANBES is a recognizable name in budget soldering kits, and this 60W set covers the essentials for FPV electronics work: an adjustable temperature iron rated from roughly 200C to 450C, a desoldering pump, 5 interchangeable tips, a steel stand, tweezers, wire and a carry bag, according to the manufacturer's Amazon listing. Working voltage is 110V, matching standard US household outlets, and the kit includes a wire stripper cutter along with two lengths of 24 gauge electronic wire for practice or small repairs. For a builder who wants one purchase covering basic repair and rework without extra research, this checks the core boxes.

The desoldering pump is the practical highlight

For FPV builders specifically, the included desoldering pump is genuinely useful when replacing a burnt out ESC, a damaged motor connection or a flight controller that needs its old solder cleared before a new component goes in. Rather than trying to wick solder away with braid alone, a pump gives a faster, cleaner removal for larger joints like motor wire pads, which speeds up a repair that would otherwise take considerably longer with just an iron and patience. Combined with the tweezers for holding small wires steady during rework, this kit covers a fairly complete repair workflow rather than just fresh builds.

Living with dial temperature control

Unlike kits that include a digital temperature readout, this ANBES iron uses a dial to set heat within its 200C to 450C range, which means there is no exact number displayed while working, only a general position on the dial calibrated to that range. For most FPV soldering tasks this is perfectly workable once a builder learns roughly where their preferred temperature sits on the dial, but it does require more trial and error initially compared with a kit offering precise digital control. The plug in iron also recovers heat more slowly than a higher wattage model when working on a large gauge XT60 joint, so patience matters on bigger connectors, and marking a reference point on the dial after the first session helps repeat that setting later.

How it compares with other soldering kits in this guide

This kit ranks in the middle of the soldering kit comparison, just behind the 60W 30-in-1 kit with its added digital multimeter and the 90W 21-in-1 kit with its higher wattage and magnifier, both of which edge it out slightly on features. Against those two, ANBES offers a more focused, less cluttered kit without the extra bulk of dozens of accessories, which some builders may actually prefer if they just want core repair tools without excess. Compared with pricier LCD digital iron kits like the WellerMan 80W option, this kit trades precise digital control for a lower price point.

Verdict and who should look elsewhere

This kit is a solid pick for a builder who wants a focused, no nonsense soldering and desoldering kit from a recognizable brand without paying for a digital display or dozens of extra accessories they may never use. Anyone who wants precise digital temperature readout or higher wattage for thick battery leads should look at the 21-in-1 90W kit or a digital LCD iron instead. For everyday FPV repair work, replacing an ESC, resoldering a motor wire or clearing an old joint, this kit handles the job reliably and keeps the workbench simple.

Frequently asked questions