# Best FPV Antenna Tubes

Source: https://dronefpvlab.com/best/antenna-tubes
Updated: 2026-09-14
Publisher: Drone FPV Lab. Our score is an editorial rating out of 10 (fit 35%, features 25%, build 20%, value 20%), not a customer rating. Method: https://dronefpvlab.com/how-we-research#our-score

The point of an antenna tube is to stop the coax on a receiver antenna from being cut, crushed or vibrated to death, and the fit is the whole story. Inner diameter has to clear the coax without pinching it, because a tube that squeezes the dielectric changes impedance and quietly costs you range, and one that is too loose lets the wire saw back and forth inside during flight. Tubes sold for the common 2.4 GHz receivers with IPEX4 connectors are sized for that thin coax, so match the tube to the receiver rather than to the airframe. Length is the detail people get wrong. The tube should support the coax up to where the active element begins and stop there, leaving the radiating tip clear, because burying the element inside a tube taped against a carbon frame is a good way to shield your own antenna and lose link at distance. Cut long tubes down rather than accepting the shipped length. Material changes handling more than performance: rigid plastic tubes hold the antenna in a fixed position, which is what you want for repeatable orientation on a racing build, while silicone protector caps and softer tubes flex on a crash instead of snapping the wire at the base. Caps at the open end are not decorative, since an uncapped tube fills with dirt and the tip frays. Buy in multiples of five or ten, since these are consumables you replace after crashes.

## Picks

### 1. Maxmoral 5 Set 2.4G Protection Antenna Tube + Caps for FPV Drone Racing Quadcopter IPEX4

Our score: 7.6/10 (Fit for the job 8/10 · Features and specs 7/10 · Build and materials 7/10 · Value 8/10)

Maxmoral 5 Set 2.4G receiver antenna protection tubes with caps for FPV racing quadcopters using IPEX4 antennas.

Pros:
- Tubes keep receiver antennas out of the props
- Caps protect antenna tips from damage in crashes
- 5 Set supplies several quads with protection

Cons:
- Tube diameter must match your antenna thickness
- Zip ties or heat shrink are needed to mount them

Details: https://dronefpvlab.com/product/B07V28F9K5

### 2. iFlight 10pcs Plastic Protection Antenna Tube with Caps for FRSKY XM/X4R IPEX4 Receiver

Our score: 7.6/10 (Fit for the job 8/10 · Features and specs 7/10 · Build and materials 7/10 · Value 8/10)

iFlight 10pcs plastic antenna protection tubes with caps for FRSKY XM and X4R receivers with IPEX4 antennas.

Pros:
- Sized for FRSKY XM and X4R antennas, so fit is snug
- 10pcs pack covers many builds and replacements
- iFlight quality plastic holds antennas firmly upright

Cons:
- Plastic can crack after repeated hard crashes
- Mounting length may need trimming for small frames

Details: https://dronefpvlab.com/product/B07DS7QJ9X

### 3. 5PCS HobbyPark Plastic Antenna Tube with Cap for RC FPV Drone Quadcopter 2.4G Receiver

Our score: 7.6/10 (Fit for the job 8/10 · Features and specs 7/10 · Build and materials 7/10 · Value 8/10)

5PCS HobbyPark plastic antenna tubes with caps for RC FPV drone quadcopter 2.4G receiver antennas.

Pros:
- Protects 2.4G receiver antennas from prop strikes
- Caps help keep antenna tips intact after tumbles in grass
- HobbyPark is a familiar hobby accessory brand

Cons:
- Only 5PCS, fewer than the other multi-packs in this guide
- Needs zip ties or heat shrink to secure the tubes to the frame

Details: https://dronefpvlab.com/product/B072JPP3HC

### 4. 12pcs Plastic Protection Antenna Tube with Caps for FPV Drone Frsky XM+ X4R Receiver

Our score: 7.6/10 (Fit for the job 8/10 · Features and specs 7/10 · Build and materials 6/10 · Value 9/10)

12pcs plastic antenna protection tubes with caps for FPV drone Frsky XM+ and X4R receivers.

Pros:
- 12pcs pack gives plenty of spares for a fleet
- Made for Frsky XM+ and X4R antenna sizes
- Caps prevent antenna tips from fraying when the quad lands upside down

Cons:
- Generic plastic may become brittle in cold weather
- Length may be too long for micro builds without trimming

Details: https://dronefpvlab.com/product/B085NDPMGZ

### 5. FPV Antenna Tube Plastic Protection Tube with Caps for FRSKY XM/X4R IPEX4 Receiver, 10pcs

Our score: 7.4/10 (Fit for the job 8/10 · Features and specs 7/10 · Build and materials 6/10 · Value 8/10)

FPV antenna tube plastic protection tubes with caps for FRSKY XM and X4R IPEX4 receivers, a 10pcs pack.

Pros:
- Fits common FRSKY XM and X4R receiver antennas
- Caps protect the sensitive antenna ends from snapping on impact
- 10pcs pack is a good value for several quads

Cons:
- Nearly identical to the iFlight tubes, so choose on price
- Plastic tubes can snap in hard crashes and need replacing

Details: https://dronefpvlab.com/product/B09SSZ121R

### 6. uxcell 20pcs Red Silicone Antenna Protector Cap for RC FPV Drone Quadcopter

Our score: 7.0/10 (Fit for the job 7/10 · Features and specs 6/10 · Build and materials 7/10 · Value 8/10)

uxcell 20pcs red silicone antenna protector caps for RC FPV drone quadcopter antennas.

Pros:
- Soft silicone caps flex instead of cracking in crashes
- Red color makes antenna tips easy to see
- 20pcs supply covers many builds and replaces caps lost in crashes

Cons:
- Caps only, so no tubes are included for mounting
- Cap size must match antenna diameter to stay on

Details: https://dronefpvlab.com/product/B08263QTQT

### 7. Duratrax Colored Antenna Tube Assortment with Tips (10-Piece)

Our score: 6.4/10 (Fit for the job 6/10 · Features and specs 6/10 · Build and materials 7/10 · Value 7/10)

Duratrax colored antenna tube assortment with tips, a 10-Piece set originally made for RC car receivers.

Pros:
- Colored tubes add style and help identify models
- Tips protect antenna ends from wear and fraying over time
- 10-Piece assortment gives spares for several models

Cons:
- Designed for RC cars, so tubes may be too long for quads
- Thicker tubes add more weight than FPV-specific options

Details: https://dronefpvlab.com/product/B000X4Q0Y8

As an Amazon Associate I earn from qualifying purchases.